Return to the translated text click hereMotul DOT 4 LV
MOTUL DOT 4 LV ist eine synthetische Bremsflüssigkeit auf Polyglykolbasis für Bremssysteme, hydraulische Kupplungen, ESP-, ABS-und ASR-Einheiten mit Herstellerempfehlung DOT 4 ISO Klasse 6, mit hohen Siedepunkten und verbessertem Fließverhalten bei niedrigen Temperaturen.
STANDARDS FMVSS 116 DOT 3 / 116 DOT 4
ISO 4925 (Classes 3, 4 & 6)
SAE J1034 / J1703 J1704
Mischbar mit allen DOT 3, DOT 4 und DOT 5.1-Produkten. Aufgrund des hohen Nasssiedepunktes besonders langlebige Bremsflüssigkeit. Hohe Temperaturwiderstandsfähigkeit und -stabilität aufgrund des hohen Trockensiedepunktes, gewährleistet hohe Sicherheit. Geringe Viskosität bei niedrigen Temperaturen verbessert das Ansprechverhalten von ESP-, ABS- und ASR-Einheiten. Ermöglicht ein effizientes Arbeiten des Bremssystems unter extremen Bedingungen. Korrosionsbeständig; verhält sich neutral gegenüber Dichtungen im Bremssystem.
EMPFEHLUNGEN UND HINWEISE:
- Austauschintervalle: Zwischen 12 und 24 Monaten (je nach Empfehlung des Herstellers).
- Sorgfältig verschließen und im Originalbehälter aufbewahren, um das Aufnehmen von Feuchtigkeit zu verhindern.
- Bremsflüssigkeiten sollten aus Sicherheitsgründen nicht nachgefüllt, sondern ausgetauscht werden!
WARNUNG: Nicht mischbar mit Bremsflüssigkeiten auf Silikonbasis (DOT 5) sowie Spezialflüssigkeiten auf mineralischer Basis (z.B. LHM). Flüssigkeit kann Lack- und Kunststoffoberflächen des Fahrzeuges angreifen. Benetzte Oberflächen gründlich mit Wasser abspülen. Bei Hautkontakt ebenfalls gründlich mit Wasser abspülen.
EIGENSCHAFTEN
Farbe Visuell Gelb
Viskosität bei 100°C 2.1 mm²/s
Viskosität bei -40°C 675.0 mm²/s
Dry boiling point 267.0 °C / 513.0 °F
Wet boiling point 172.0 °C / 342.0 °F
This is an automatic translation. Click here for the original text in GermanMotul DOT 4 LV
MOTUL DOT 4 LV is a polyglycol based synthetic brake fluid for brake systems, hydraulic clutches, ESP, ABS and ASR units with manufacturer recommendation DOT 4 ISO Class 6, with high boiling points and improved low temperature flow characteristics.
STANDARDS FMVSS 116 DOT 3 / 116 DOT 4
ISO 4925 (Classes 3, 4 & 6)
SAE J1034 / J1703 J1704
Miscible with all DOT 3, DOT 4 and DOT 5.1 products. Particularly durable brake fluid due to its high wet boiling point. High temperature resistance and stability due to high dry boiling point, ensures high safety. Low viscosity at low temperatures improves the response of ESP, ABS and ASR units. Allows the brake system to work efficiently under extreme conditions. Corrosion resistant; behaves neutrally towards seals in the brake system.
RECOMMENDATIONS AND NOTES:
- Replacement intervals: between 12 and 24 months (depending on the manufacturer's recommendation).
- Carefully seal and store in original container to prevent absorption of moisture.
- For safety reasons, brake fluids should not be refilled, but replaced!
WARNING: Not miscible with silicone-based brake fluids (DOT 5) and special mineral-based fluids (e.g. LHM). Fluid may attack paint and plastic surfaces of the vehicle. Thoroughly rinse wetted surfaces with water. In case of skin contact, also rinse thoroughly with water.
PROPERTIES
Color Visual Yellow
Viscosity at 100°C 2.1 mm²/s
Viscosity at -40°C 675.0 mm²/s
Dry boiling point 267.0 °C / 513.0 °F
Wet boiling point 172.0 °C / 342.0 °F